ALiEn2

ETC controllers that support Modbus have multiple options for storing date/time as well as elapsed time. This allows you to configure our products to work best with your Modbus drivers and SCADA system. Elapsed Time Values Elapsed time values are used for timers or settings that do not contain a…

The purpose of Adaptive Seeking Velocity Optimization is adjust the Afterflow Time and/or Close Time to influence the plunger to arrive at a given velocity/time. This helps to both ensure consistent runs and provide a means to autonomously adjust to changing well conditions. Patents Velocity/Time Optimizations Basics Timing of Adjustments…

Each product that ETC manufacturers has a unique model number comprised of: Product Family Product Type Unique Variant Controllers The following is a list of current and obsolete ETC controllers: Product Brand Part Number ALiEn2 Lite ETC ET-12001-0321-1103 ALiEn2 ETC ET-12001-0121-0001 ALiEn2 Expert ETC ET-12001-0221-0002 DefinitiveCommander Definitive ET-12001-0121-0201 Definitive ExpertSupreme…

There are a number of common problems that can happen when trying to use Modbus with the ALiEn2 or Sasquatch. Please check each of the sections below. Is Modbus enabled? For the ALiEn2, Modbus is diabled by default to save power. Press install Navigate down to Modbus and press select.

While the ALiEn2 was designed as a plunger lift controller, the Expert level model does have additional valves that can be used to open and close gas injection at different portions during the plunger lift cycle. GAPL SOftware A special build of software has been created to be used on…

ETC plunger lift controller enclosures are pre-punched to accommodate both single valve solenoids and dual valve solenoid assemblies. A dual valve solenoid assembly comes with two (2) solenoids connected together with a pre-installed tee. The ALiEn2 Expert can support a total of three (3) solenoids. This can be achieved by…