ALiEn2

The AliEn2 Expert comes with 2 analog inputs that are used to connect pressure transducers. These by default are used for Line Pressure and Casing Pressure. While you can decide to use Tubing Pressure instead of Line Pressure, you will need both if you wish to use Load Factor. You…

Overview Using the Sasquatch with the ALiEn2 Expert controller allows the surface velocity to be read each cycle and be used for safety and/or optimization. This article explains the steps required to connect, configure, and troubleshoot this setup. Installation There are several steps to installing the Sasquatch as well as…

Autosol has taken their standard Modbus driver and created a version specific to the ALiEn2 that helps to retrieve both the Daily Production Log and Cycle Logs. You can see their help below for setup instructions. The sections below give more detail on how the driver works with the ALiEn2….

The ALiEn2 line of plunger controllers has a feature called Non-Arrival to deal with plungers that do not arrive within the specified Rise Time. Non-Arrival Event When the controller determines that a plunger arrival has been missed, it records a Non-Arrival, shuts the Sales Valve, and enters the Non-Arrival Close…

The ALiEn2 line of controllers will work with any SCADA system that supports standard Modbus. You can choose to implement your own solution using our Modbus map or work with one of the many pre-integrated solutions. Pre-Integrated Solutions A number of on premise and web based tools and systems have…

The ALiEn2 and ALiEn2 Expert has a set of built in features that can be used to track the wear and tear on our plungers. This tracks both the number of arrivals and the distance travelled. Plunger Statistics Log Number of Arrivals Each time that a plunger arrival is detected,…