ALiEn2

The ALiEn2 and ALiEn2 Expert comes with a universal mounting bracket that attaches to the bolts coming out of the back of the enclosure. This unique bracket accommodates almost any mounting configuration you can think of. Enclosure and Bracket Overview The controller enclosure is equipped with four (4) studs on…

The simulator is based on the same software as the controller and therefore supports all of the same features. If you wish to use Modbus to interact with the simulator, you must enable the Modbus Server and turn on Modbus in the controller menus. What You Need Before planning to…

Vision Device Management can connect to a physical controller using a serial port or to the simulator using TCP. The pre-configured SCADA Server allows a user to interact with the controller by reading or writing settings. What You Need Before planning to interact using Modbus, you should make sure you…

The ALiEn2 line of controllers are designed to be ultra low powered, which does restrict the type of pressure transducer that can be powered and read. Please see the sections below for more details. Single Pressure Transducer A single pressure transducer is used for reading casing, line, or tubing pressure….

All of the certification certificates and control drawings for ETC products can be found on their product page. Click on the links below to go to the appropriate page:

ETC plunger lift controllers have an error handling mechanism to deal with software errors in a graceful fashion. More minor errors might prevent a setting from being entered or show a partial number on the screen. More severe errors that cannot be handled appropriately will cause the controller to be…