Sasquatch

Fast plungers cause dangerous hard impacts at surface. The magnitude of the impact is not based on velocity of the plunger alone. To properly monitor and control a plunger well and align with the API 11PL standard, you must monitor Kinetic Energy (KE). API 11PL In June 2020, a new…

The Sasquatch calculates the surface velocity of the plunger on each arrival event. This is stored in a log with the latest value being available at the head of the log. As new arrivals come in, older entries are all pushed down. When the log is full, the oldest entry…

ETC controllers that support Modbus have multiple options for storing date/time as well as elapsed time. This allows you to configure our products to work best with your Modbus drivers and SCADA system. Elapsed Time Values Elapsed time values are used for timers or settings that do not contain a…

The Sasquatch uses Geomagnetic Sensing to capture waveforms as the plunger passes by each of the sensors. The more complete the waveforms are and then less interference there is, the better the velocity reading will be. Mounting Location The Sasquatch should be mounted as low on the lubricator as possible…

The Sasquatch uses the same Geomagnetic Sensing Technology that is found in the Cyclops. Instead of having a single eye, Sasquatch has 2 eyes and a bigger footprint (Get it… Bigfoot…. Sasquatch). Patents Arrival Detection The Sasquatch by default will take magnetic readings and apply a filter to remove the…

Each product that ETC manufacturers has a unique model number comprised of: Product Family Product Type Unique Variant Controllers The following is a list of current and obsolete ETC controllers: Product Brand Part Number ALiEn2 Lite ETC ET-12001-0321-1103 ALiEn2 ETC ET-12001-0121-0001 ALiEn2 Expert ETC ET-12001-0221-0002 DefinitiveCommander Definitive ET-12001-0121-0201 Definitive ExpertSupreme…