Vision

ETC plunger lift controllers have a bootloader and separate firmware image that is used when it comes to programming them with a new version of software. This allows users to erase the firmware and replace it with a newer version or a release with a different feature set. What You…

Use Vision to connect to the sensor. Click here for the steps. Ensure that the dial on the sensor is set to 0. Click the Normal Mode radio button Press Set Mode Turn the dial on the sensor back to a non-zero value before using it.

Geomagnetic sensing is a technology that uses a magnetometer and a microprocessor to read the Earth’s magnetic field and look for changes in the field over time to detect an event. This technology is used in both the Cyclops and Sasquatch sensors. Video Overview Benefits of geomagnetic sensing There are…

ETC Sensors have a unique technology embedded in them called Geomagnetic Sensing that monitors the Earth’s magnetic field in real time and then reacts to anomalies caused by ferrous metals found in plungers. By connecting Vision, we can see the changes to the magnetic field in real time. What You…

All models of Cyclops and Sasquatch have a built in self test that generates a magnetic field and measures it to ensure that all components in the detection path are operational. This is used during manufacturing, but can also be performed in the field. WHAT YOU NEED Before planning to…

Vision is a free PC software application that is available for download on the Vision product page through the menu.